这是描述信息

PRODUCTS

PRODUCTS
Where are you now:
Homepage
/
/
Spiral Wound PTFE Gasket SS304 SS316L With Carbon Fiber
Number of views:
1000

Spiral Wound PTFE Gasket SS304 SS316L With Carbon Fiber

DESCRIPTION OF PRODUCTS Metal spiral wound gasket is widely used as a sealing gasket at present. It is the best elastic gasket in semi-metal sealing gasket. It is made of V-shaped or W-shaped thin steel belt and various fillers alternately wound and can withstand The use of high temperature, high pressure and conditions suitable for ultra-low temperature or vacuum conditions can solve the problem of chemical corrosion of various gaskets by changing the material combination of the gasket. The structural density can be made according to the different locking force requirements to strengthen The main body and accurate positioning, winding gasket with metal inner ring and outer ring, using internal and external steel ring to control the maximum compression, the gasket surface contact surface of the flange sealing surface requirements are not high.   APPLICATION * Suitable for uneven load, easy relaxation of joint force, periodic change of temperature and pressure, impact or vibration. * Is the valve, pump, heat exchanger, tower, manhole, hand hole and other flange connections of the static seal original, * Widely used in petrochemical, machinery, power, metallurgy, shipbuilding, medicine, atomic energy and aerospace and other departments. FILLED MATERIAL AND MAIN PROPERTIES Filler Temperature(℃ ) Max Pressure Media Compression(% ) Rebound(% ) Relaxation(%) F.G. -220--550 250 BAR corrosive 18--30 ≥17 ≤18 ASB -150--450 100 BAR vulgaris air tightness 18--30 ≥19 ≤28 PTFE -200-- 250 100 BAR corrosive 18--30 ≥15 ≤13 NAF -100--350 100 BAR vulgaris air tightness 18--30 ≥19 ≤28 MICA -150--800 100 BAR H-TEMP 18--30 ≥19 / CER -200--1090 100 BAR Ultra-TEMP 18--40 ≥19 /   MATERIALS FOR OD AND ID,MAIN PROPERTIES Materials Mark Hardness(HB) Temperature(°C) Carbon steel CS 120 -40~+540 SUS 304 304 130~180 -195~+550 SUS 316L 316L 130~180 -100~+550 SUS 321 321 130~190 -195~+760 HASTELLOR-B2 HASTB 215 -185~+1090 INCONEL-600 INC600 150 -100~+1090 MONEL-400 MON 150 -130~+820 Ti T2 215 -195~+1090   STANDARD ·HG20610 /HG20631 / ·ASME B16.20/·DIN / BS 3381-1999 ·JIS B2404-1999 JIS TS-1998 ·GB/T4622.2 /·JB/T4719 /SH3407  and so on   CHARECTERISTIC 1.The applicable working condition range is wide. Can resist high temperature, high pressure, and adapt to the use condition of ultra-low temperature or vacuum. By changing the material combination of the gasket, the chemical corrosion problem of the various media to the gasket can be solved. 2.The stress compensation ability is strong. The sealing performance is stable and reliable at the station with frequent temperature and pressure fluctuation. 3.The sealing performance is excellent. 4.The surface accuracy requirement for flange sealing contact with the gasket is not high. 5.The installation is convenient, and the pre-tightening pressure of the gasket is low.   Our Services  OUR SERVICE 1)Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time. 2)Our working time is 7.30 AM --17:30 PM,Monday to Saturday. 3)General samples time can be arranged within 2--5days. 4)Orders will be produced exactly as request and approved samples. 5)When mass production,we send photos to show the production line.And confirm the estimate time again. 6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection. 7)Before shipment,our QC will have inspection to make sure the quality. 8)We always try best to ensure every order to delivery in time. Company Information   Zhenjiang Chunhuan Sealing Material Co., Ltd is one of the fluoroplastics processing enterprises taking the lead in passing the IS09001 quality system certification. And with the strength of PTFE products, which are superior quality with REACH,RoHS,MSDS certificate. Our group mainly manufactures products: PTFE rod, PTFE film, pipes, sheets & mats, PTFE push rods & extrude rods, PTFE turning plates & teflon fi
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
1
Product description
Parameters

DESCRIPTION OF PRODUCTS
Metal spiral wound gasket is widely used as a sealing gasket at present.

It is the best elastic gasket in semi-metal sealing gasket. It is made of V-shaped or W-shaped thin steel belt and various fillers alternately wound and can withstand The use of high temperature, high pressure and conditions suitable for ultra-low temperature or vacuum conditions can solve the problem of chemical corrosion of various gaskets by changing the material combination of the gasket.

The structural density can be made according to the different locking force requirements to strengthen The main body and accurate positioning, winding gasket with metal inner ring and outer ring, using internal and external steel ring to control the maximum compression, the gasket surface contact surface of the flange sealing surface requirements are not high.

980 x 540.png

 

APPLICATION

* Suitable for uneven load, easy relaxation of joint force, periodic change of temperature and pressure, impact or vibration.

* Is the valve, pump, heat exchanger, tower, manhole, hand hole and other flange connections of the static seal original,

* Widely used in petrochemical, machinery, power, metallurgy, shipbuilding, medicine, atomic energy and aerospace and other departments.

JPG-CH.jpg

FILLED MATERIAL AND MAIN PROPERTIES

Filler

Temperature(℃ )

Max Pressure

Media

Compression(% )

Rebound(% )

Relaxation(%)

F.G.

-220--550

250 BAR

corrosive

18--30

≥17

≤18

ASB

-150--450

100 BAR

vulgaris air tightness

18--30

≥19

≤28

PTFE

-200-- 250

100 BAR

corrosive

18--30

≥15

≤13

NAF

-100--350

100 BAR

vulgaris air tightness

18--30

≥19

≤28

MICA

-150--800

100 BAR

H-TEMP

18--30

≥19

/

CER

-200--1090

100 BAR

Ultra-TEMP

18--40

≥19

/

 

MATERIALS FOR OD AND ID,MAIN PROPERTIES

Materials

Mark

Hardness(HB)

Temperature(°C)

Carbon steel

CS

120

-40~+540

SUS 304

304

130~180

-195~+550

SUS 316L

316L

130~180

-100~+550

SUS 321

321

130~190

-195~+760

HASTELLOR-B2

HASTB

215

-185~+1090

INCONEL-600

INC600

150

-100~+1090

MONEL-400

MON

150

-130~+820

Ti

T2

215

-195~+1090

 

STANDARD

·HG20610 /HG20631 / ·ASME B16.20/·DIN / BS 3381-1999

·JIS B2404-1999 JIS TS-1998

·GB/T4622.2 /·JB/T4719 /SH3407  and so on

 

CHARECTERISTIC

1.The applicable working condition range is wide. Can resist high temperature, high pressure, and adapt to the use condition of ultra-low temperature or vacuum. By changing the material combination of the gasket, the chemical corrosion problem of the various media to the gasket can be solved.

2.The stress compensation ability is strong. The sealing performance is stable and reliable at the station with frequent temperature and pressure fluctuation.

3.The sealing performance is excellent.

4.The surface accuracy requirement for flange sealing contact with the gasket is not high. 5.The installation is convenient, and the pre-tightening pressure of the gasket is low.

 

Our Services

 OUR SERVICE
1)Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2)Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.

Company Information

 QQ20180816133858.jpg

Zhenjiang Chunhuan Sealing Material Co., Ltd is one of the fluoroplastics processing enterprises taking the lead in passing the IS09001 quality system certification. And with the strength of PTFE products, which are superior quality with REACH,RoHS,MSDS certificate.
Our group mainly manufactures products: PTFE rod, PTFE film, pipes, sheets & mats, PTFE push rods & extrude rods, PTFE turning plates & teflon film , PTFE fillings, PTFE belts, ropes, tapes & packing tapes, metallic gaskets, PTFE corrosion resistant linings, composited tubes & pipe fittings, rubber sheets, mats, framework oil seals & o-rings.

Keyword:
the
and
of
is
to
gasket
ptfe
temperature
sealing
We could not find any corresponding parameters, please add them to the properties table
Previous

Related products

CONTACT US

 

Mobile:+86-18005286016
Fax:86-511-88515840
Address:P.O.BOX 19#,Yangzhong,Jiangsu,China
Whatsapp/wechat:+86-13815189917
QQ:123545872
E--mail:
lg@chunhuan.com 

 

chunhuan

Mobile website

Copyright (c)   Zhenjiang Chunhuan Sealing Materials Co., Ltd.(Group)  All Rights Reserved

Powered by www.300.cn  苏ICP备10218199号-1