PRODUCTS
BRONZE PTFE ROD
PTFE Extruded/Molded Rod
I、Features
Diameter 1-5mm rods are made of polytetrafluoroethylene resin by paste extrusion processing; Diameter 6-200mm rod selection suspension PTFE resin made by plunger processing; Diameter more than 200mm rods by molding production.
| Type | Diameter(mm) | Length(mm) |
| PTFE Extruded Rod |
4,5,6，7,8,9，10,13,15,16,18，20,25,30，35,40,45,50，55,60,65,70,75,80,85,90,100,120,110, |
1000，2000,3000 |
| PTFE Molded Rod |
180,200,250,270,300,350,400,500,600 |
100-300 |
II、Types and Specifications
III、Main Properties
| Properties | Unit | Result |
| Apparent Density | g/cm3 | 2.10 ~2.30 |
| Tensile Strength(min) | Mpa | 14.0 |
| Elongation At Break | % | 140 |
Note: When the diameter of rod is larger than 16mm,only test apparent density.
IV、Applications
Chemical: can be used as anti-corrosion materials, can manufacture a variety of anti-corrosion parts, such as pipes, valves, pumps and fittings joints. Chemical equipment, can be produced reactor, distillation column and anti-corrosion equipment lining and coating.
Mechanical: can be used as self-lubricating bearings, piston rings, oil seals and seals. Self-lubrication can reduce wear and heat and reduce power consumption.
Electronic and electrical aspects: mainly used in the manufacture of various wire and cable, battery electrodes, battery separator, printed circuit boards.
Related products
-
PTFE Etched Film: For applications in which the PTFE film needed be bonded, we recommend a one side etched (or two side) etched PTFE film.One Side Etched Sheet0.00PTFE Etched Film: For applications in which the PTFE film needed be bonded, we recommend a one side etched (or two side) etched PTFE film. -
Skived PTFE sheet is manufactured by technology of compacting, sintering, rotary cutting with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of skived teflon PTFE sheet has similar friction levels to ice. Skived teflon PTFE sheet can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.Skived Sheet0.00Skived PTFE sheet is manufactured by technology of compacting, sintering, rotary cutting with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of skived teflon PTFE sheet has similar friction levels to ice. Skived teflon PTFE sheet can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.
-
molded PTFE sheet is manufactured by molding method with PTFE granular resin. In fluoroplastics, PTFE got the most consumption and was used widely. It's an important material in variety of fluoroplastics. PTFE exhibits astonishing chemical resistance. This self-lubricating material provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals.Molded Ptfe Sheet0.00molded PTFE sheet is manufactured by molding method with PTFE granular resin. In fluoroplastics, PTFE got the most consumption and was used widely. It's an important material in variety of fluoroplastics. PTFE exhibits astonishing chemical resistance. This self-lubricating material provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals.
-
Ptfe Skived Sheet Plate 100% Virgin material overcomes the shortcomings of ordinary plastics and metals that are not resistant to corrosion, and has become the main corrosion-resistant material in the petroleum, chemical and textile industries. For example, it is used to manufacture conveying pipes, exhaust pipes, steam pipes, etc. for conveying aggressive gases.Ptfe Skived Sheet Plate 100% Virgin0.00Ptfe Skived Sheet Plate 100% Virgin material overcomes the shortcomings of ordinary plastics and metals that are not resistant to corrosion, and has become the main corrosion-resistant material in the petroleum, chemical and textile industries. For example, it is used to manufacture conveying pipes, exhaust pipes, steam pipes, etc. for conveying aggressive gases.
-
-
-
-
-
E-mail:
lg@chunhuan.com
Mobile: +86 18005286016
Fax: +86 511 88515840
Address: P.O.BOX 19#,Yangzhong,Jiangsu,China
Whatsapp/wechat: +86 13815189917
QQ:123545872
Mobile website
+86 18005286016
Messages
Whatsapp
Skype
Copyright (c) Zhenjiang Chunhuan Sealing Materials Co., Ltd.(Group) All Rights Reserved