Best PTFE glass fiber gasket from China occupies a place in sealing materials with its unique properties. PTFE gaskets are widely used. The requirements of gaskets can be determined according to the usage conditions. You can also refer to the standard of non-metallic gaskets on steel flanges. There are many processing methods for Best PTFE glass fiber gasket from China. Here we mainly introduce Commonly used production methods.

　　1. PTFE plate cutting gasket

　　Utilize best PTFE glass fiber gasket from China for cutting and processing, usually the boards we produce are relatively large in size, so we can use turning boards or molded boards to directly draw out gaskets, or cut them into squares or round blocks, and then pass them through a lathe Turning into gaskets, and thinner gaskets can also be made into punching dies, which are punched out directly under the press.

　　With the improvement of processing conditions, many gaskets can be directly placed on the computer engraving machine for operation. If the diameter of the gasket is large, we can process it into a circular strip first, and then weld it;

　　2.Best PTFE glass fiber gasket from China PTFE tube turning gasket

　　Using PTFE molded tube turning gasket, the surface of PTFE tube turning gasket has good flatness, large output and less waste, and it is also a relatively economical processing method. The disadvantage of processing is that gaskets of each specification need to be matched. Tube mold.